SOMFY Telis Soliris 4 RTS - remote control, replacement

(VAT 21%)
25.2 EUR
Part number:Telis-Soliris-4-RTS-rolo
Availability:> 10 pieces in stock
Warranty terms: Brand new, 2 years guarantee,
accepting returns within 30 days

Delivery to EU: 2 to 7 days, non-EU: 2-20 days


Replacement remote control SOMFY Telis Soliris 4 RTS - 100% replacement 1:1 of the original remote control.

Remote control is dedicated for SOMFY device models: 1810957, TELIS SOLIRIS 5 RTS LOUNGE, TELIS SOLIRIS 5 RTS PATIO, TELIS SOLIRIS 5 RTS PURE, TELIS SOLIRIS 5 RTS SILVER, TELIS-SOLIRIS-5-RTS-LOUNGE, TELIS-SOLIRIS-5-RTS-PATIO, TELIS-SOLIRIS-5-RTS-PURE, TELIS-SOLIRIS-5-RTS-SILVER, TELISSOLIRISRTS5LOUNGE, TELISSOLIRISRTS5PATIO, TELISSOLIRISRTS5PURE, TELISSOLIRISRTS5SILVER. (There may not be listed all compatible models. If you are not sure, just tell us your device model (by online chat, email), we will promptly check, verify if compatible. The verified compatibility is quaranteed by us.)

This remote control is available on branded remote control General ROLO (shown on the left).

General ROLO is a remote control replacement that allows you to control blinds, awnings, draperies, and many other SOMFY devices in your house. It is a replacement radio remote control which you can control up to 5 independent motors or 5 combinations of motors.


  • The remote control is available in the unique white colour design
  • Operating frequency: 433,42 MHz (RTS)
  • It controls the basic functions (up, down, stop, angle of the blades)
  • It has 5 channels
  • If you happen to have the paired remote control already, pairing the General ROLO remote control is very easy
  • Package dimensions: 135 x 55 x 21 mm
  • Dimensions exc. wall mount: 126 x 44 x 10 mm
  • Dimensions inc. wall mount: 129 x 48 x 15 mm

The General ROLO remote control is supposed to control the motor, however, it is not suitable for programming it.


In case you have a paired remote control home, use pairing procedure described below. In case the paired remote control is no longer available the pairing process will require you to disconnect and reconnect your drive unit from the power source. The procedures and tips on how to do so may be found in the included manual or in the PICTURES ABOVE

  1. Press the programming button on your paired remote control and have it held until the Jog = Slight up and down movement.
  2. Select the channel you want the drive unit to be programmed on, on the General ROLO remote control (you can switch between the channels using LEFT and RIGHT buttons).
  3. Press the programming button on the new General ROLO remote control and have it held until the motor jogs.
  4. The General ROLO remote control has been successfully paired with your drive unit.


  • General ROLO remote control
  • Wall mount
  • CR2032 battery
  • Manual



Copyright © 2021 REMOTE CONTROL WORLD.