Replacement radio (RF) remote control fully compatible with type ENIKA TX KEY 433,92 MHz.

Perfect 1:1 copy designed and manufactured by our company – has all the functions of the original remote for these models of brand ENIKA: BOSYS®, RX PULSE H, RX1 DIN, RX2 N, RX2 N/K, RX8 DIN. (There may not be listed all compatible models. If you are not sure, just tell us your device model (by online chat, email), we will promptly check, verify if compatible with your device. The verified compatibility is guaranteed by us.)

This remote control is available on branded remote control General VATRONIC (shown on the left). We guarantee that the remote control will perform all the functions of the original RC.

• The RF remote control General VATRONIC fully replaces the original remote control.
• Only one single remote control could be used up for 4 different brands or models of different Frequencies (270-870 MHz).
• Remote control works with both fixed and rolling codes.
• Multi-frequency auto-scan remote control.
• Copying/cloning transmitting code/protocol from the original remote.
• Includes a 3V CR2032 battery and a metal keychain carabiner.
• Dimensions: 73 x 31 x 11 mm
• If any specific colour required, state this information to the customers note when placing an order.

The remote control supplied is already pre-programmed on buttons ▲ and ▼. You only need to register the remote control to your original receiving unit memory.

Procedure for copying the code from the original remote control:

! You will receive the remote control specially set for the drive, do not learn/rewrite the remote control signal.

How to REGISTER the new remote control into the original main unit:

1. Press the "PROG" button on the ENIKA receiver briefly once - the "REC" indicator LED will light.
2. Within 30 seconds press the ▲ or ▼ button on the General VATRONIC remote control.
3. Repeat pressing the same button as in the previous step. (note: there must be a 2-second pause between individual presses of the General VATRONIC remote button)
4. Simultaneous flashing of the ENIKA receiver's "A" and "B" indicator LEDs will confirm the code has been recorded correctly.

One RF General VATRONIC remote for everything: You can clone controls for another gate/garage door, blinds, remotely controlled sockets, and anything else you have at home with RF (radio) remote control on the other 3 buttons in a similar way. Thus, it can control up to 4 different devices/receivers. Receivers can be of different (any) brands and frequencies with both fixed and floating codes. General VATRONIC and General GATE are indeed the ONLY RF remote controls on the market that are truly so universal that you can program codes from various gate and door manufacturers into one remote. Supported frequency 280-870 MHz.