Replacement radio (RF) remote control fully compatible with the type ENIKA TX KEY 433,92 MHz.

Perfect 1:1 copy designed and manufactured by our company – has all the functions of the original remote for these models of brand ENIKA: BOSYS®, RX PULSE H, RX1 DIN, RX2 N, RX2 N/K, RX8 DIN. (There may not be listed all compatible models. If you are not sure, just tell us your device model (by online chat, email), we will promptly check, verify if compatible with your device. The verified compatibility is guaranteed by us.)

This remote control is available on branded remote control General GATE (shown on the left). We guarantee that the remote control will perform all the functions of the original RC.

• The RF remote control General GATE fully replaces the original remote control.
• Only one single remote control could be used up for 4 different brands or models of different Frequencies (270-870 MHz).
• Remote control works with both fixed and rolling codes.
• Multifrequency auto-scan remote control.
• Copying/cloning of the code/protocol from the original remote control.
• Battery Panasonic CR2032 included.
• Dimensions: 69 x 34 x 10 mm
• If any specific colour required, state this information to the customers’ note during placing an order.

The remote control supplied is already pre-programmed on buttons 1 and 2. You only need to register the remote control to your original receiving unit memory

Copying code from the original remote control:

! You will receive the remote control specially set for the drive, do not learn/rewrite the remote control signal.

How to REGISTER the new remote control into the original main unit:

1. Press the "PROG" button on the ENIKA receiver once briefly - the "REC" indicator LED will light.
2. Within 30 seconds press the button with symbol 1 or 2 on the General GATE remote control.
3. Repeat pressing the same button as in the previous step. (note: there must be a 2 second pause between individual presses of the General GATE remote button)
4. Simultaneous blinking of the ENIKA receiver indicator LEDs "A" and "B" will confirm successful programming.

One single RF General GATE remote control for all: gate, garage door, venetian blind and indoor lightning. Other 3 buttons of the remote control could be programmed for other devices which require RF (radio) remote control. So it can control up to 4 different devices / receivers. This remote control could be used and programmed for any brand (with both fixed and rolling code). General GATE is THE ONLY RF remote control that you can program with codes of different door/gate manufacturers/frequencies into one General GATE. Supported frequency 280-870 MHz.