Replacement radio (RF) remote control fully compatible with type HÖRMANN HSM2, HSM4 433,92 MHz.

Perfect 1:1 copy designed and manufactured by our company – has all the functions of the original remote for these models of brand HÖRMANN: HS2 433, HS4 433, HSE2 433, HSE4 433, HSM2 433, HSM4 433. (There may not be listed all compatible models. If you are not sure, just tell us your device model (by online chat, email), we will promptly check, verify if compatible with your device. The verified compatibility is guaranteed by us.)

This remote control is available on branded remote control General VATRONIC (shown on the left). We guarantee that the remote control will perform all the functions of the original RC.

• The RF remote control General VATRONIC fully replaces the original remote control.
• Only one single remote control could be used up for 4 different brands or models of different Frequencies (270-870 MHz).
• Remote control works with both fixed and rolling codes.
• Multi-frequency auto-scan remote control.
• Copying/cloning transmitting code/protocol from the original remote.
• Includes a 3V CR2032 battery and a metal keychain carabiner.
• Dimensions: 73 x 31 x 11 mm
• If any specific colour required, state this information to the customers note when placing an order.

Procedure for copying the code from the original remote control:

1. Press and hold the button X on General VATRONIC and then press the button ✓ 4 times.
2. Release both buttons. The red indicator LED on the General VATRONIC remote will briefly flash every two seconds.
3. Place the original remote control that you want to duplicate in front of or next to the General VATRONIC remote.
4. On the original remote control, press and hold the button that you want to duplicate. Keep it pressed until the blue indicator LED on the General VATRONIC remote starts flashing rapidly.
5. At this moment, press the button on the General VATRONIC remote where you want to save the code. The blue LED on the remote will briefly light up and turn off - this confirms the code has been saved.
6. The copy has been successfully created. The remote control is ready for immediate use.

How to REGISTER the new remote control into the original main unit:

1. Short press the programming button "P" on the control unit - the red LED starts flashing slowly.
2. Press for at least 1 second the button you want to program on the new remote control - distance 1 meter between the transmitter and the receiver.
3. When successful, the red LED on the PJ flashes faster - release the remote control button.
4. As soon as the red LED stops blinking, receiving unit is ready for operation - test the remote control.

Note: Be careful with the color keys of the original HÖRMANN remote control. Each color of the HÖRMANN remote control buttons has a different frequency. Blue 868 MHz; Orange 433 MHz; Gray 40.685 MHz; Green 26,975 MHz.

One RF General VATRONIC remote for everything: You can clone controls for another gate/garage door, blinds, remotely controlled sockets, and anything else you have at home with RF (radio) remote control on the other 3 buttons in a similar way. Thus, it can control up to 4 different devices/receivers. Receivers can be of different (any) brands and frequencies with both fixed and floating codes. General VATRONIC and General GATE are indeed the ONLY RF remote controls on the market that are truly so universal that you can program codes from various gate and door manufacturers into one remote. Supported frequency 280-870 MHz.