Replacement radio (RF) remote control fully compatible with type BFT MITTO COOL C2 .

A perfect 1:1 copy designed and manufactured by our company – has all functions of the original remote for these BFT models: BOTTICELLI, CLONIX, DEIMOS, TELEC MA (There may not be listed all compatible models. If you are not sure, just tell us your device model (by online chat, email), we will promptly check, verify if compatible with your device. The verified compatibility is guaranteed by us.)

This remote control is available on branded remote control General VATRONIC (shown on the left). We guarantee that the remote control will perform all the functions of the original RC.

• The RF remote control General VATRONIC fully replaces the original remote control.
• Only one single remote control could be used up for 4 different brands or models of different Frequencies (270-870 MHz).
• Remote control works with both fixed and rolling codes.
• Multi-frequency auto-scan remote control.
• Copying/cloning transmitting code/protocol from the original remote.
• Includes a 3V CR2032 battery and a metal keychain carabiner.
• Dimensions: 73 x 31 x 11 mm
• If any specific colour required, state this information to the customers note when placing an order.

The remote control supplied is already pre-programmed on buttons ▲ and ▼. You only need to register the remote control to your original receiving unit memory.

Procedure for copying the code from the original remote control:

method of pairing/coding on request

How to REGISTER the new remote control into the original main unit:

1. Remove the cover of the BFT drive unit. Locate the display and the OK, + and - buttons on the control board.
2. Activate the MENU by pressing the OK button.
3. Navigate through the MENU using the +/- buttons until you reach the "rAdIo" command and confirm by pressing the OK button. The command "Add StArt" will appear on the display.
4. At the same time, press the * and ** buttons on the General GATE remote control. After 5 seconds, the General GATE remote control will start blinking quickly - release the buttons on the General GATE remote control.
5. Confirm the "Add StArt" command on the BFT drive board by pressing the OK button, and the message "hIddEn bUtton" will appear immediately.
6. The General GATE remote control continues to blink, press the * or ** button on the General GATE remote control and the command "rELEASE" will appear on the display.
7. After the LED on the General GATE remote control turns off, a new command "dESIrEd BUtton" will appear.
8. Press the same button as in step 5 on the General GATE remote control. Hold the button for about 3 seconds.
9. The display should show "ok XY", which is the number of the registered remote control, and the command "Add StArt" will appear again immediately.
10. To exit the BFT drive MENU, simultaneously press the +/- buttons to go back one step to "rAdIo".
11. Repeat the same +/- press to exit the MENU.
12. Now test the General GATE remote control.

One RF General VATRONIC remote for everything: You can clone controls for another gate/garage door, blinds, remotely controlled sockets, and anything else you have at home with RF (radio) remote control on the other 3 buttons in a similar way. Thus, it can control up to 4 different devices/receivers. Receivers can be of different (any) brands and frequencies with both fixed and floating codes. General VATRONIC and General GATE are indeed the ONLY RF remote controls on the market that are truly so universal that you can program codes from various gate and door manufacturers into one remote. Supported frequency 280-870 MHz.