Remote control GENERAL VATRONIC is a radio multi-frequency universal remote control that allows you to control up to 4 different devices of various signals and frequencies (gates, doors, blinds, lighting/sockets in your home or apartment). Each button on the remote control represents a separate remote.

The body of the remote control is made of a combination of plastic and metal. It has been tested that the buttons respond excellently and do not stick even after extended use. The rubber keypad is soft enough to prevent accidental button pressing in your pocket. Pressure is required to compress the metal micro-switch.

Its design is significantly better compared to its predecessor General GATE or similar remote control WHY EVO. 

Price for 1 piece of General VATRONIC remote - please specify the desired color in the comments during the order process (WHITE / RED / BLUE / GREEN / YELLOW).

The RF remote control General VATRONIC fully replaces any original remote control with a frequency of 280 MHz to 870 MHz with a fixed (FIX) or floating (ROLLING) signal/code.

• Can combine up to 4 different brands/manufacturers and models across various frequencies.
• ​Supports both fixed and FLOATING (rolling) codes.
• ​​​Multi-frequency auto-scan remote 280-868 MHz.
• Copying/cloning broadcasting code/protocol from the original remote.
• Comes with a 3V CR2032 battery.
• Dimensions: 73 x 31 x 11 mm.

CODE DUPLICATION PROCEDURE:

1. Press and hold the X button on General VATRONIC and then press the ✓ button 4 times.  

2. Release both buttons. The red indicator LED on the General VATRONIC remote will blink briefly every two seconds.  

3. Place the original remote control that you want to duplicate in front or next to the General VATRONIC.  

4. On the original remote control, press and hold the button you want to duplicate. Hold the button on the original until the blue indicator LED on the General VATRONIC  blinks rapidly.

5. At this moment, press the control button on General VATRONIC where you want to save the code. The blue LED on the remote will briefly light up and turn off. This will confirm the successful storage of the code to the selected button.

6A. (FIXED code) The copy has been successfully created. The remote control is ready for IMMEDIATE use.

6B. (FLOATING/ROLLING code) The copy has been successfully created. The remote control General VATRONIC needs to be registered with the drive unit (see manual for drive/receiver).

*There are also other special procedures for brands AVIDSEN, BFT, ERREKA, EXTEL, FAAC, GENIUS, MOVETO, OTIO, V2 s.p.a.

One remote control General VATRONIC for everything: You can similarly program the control of garage doors, blinds, remotely controlled sockets, and everything else you have at home on RF remote control on the other 3 buttons. Receivers can be of various (any) brands and manufacturers with either fixed or floating codes. General GATE is the ONLY RF remote control on the market that is truly universal, allowing you to program codes from various manufacturers of doors and gates, blinds, and awnings into one remote.