The GENERAL GATE remote control is a replacement radio-frequency multifunctional universal remote control that allows you to control up to 4 gates, garage doors, blinds, and lighting in your house or apartment. The remote control is made of special soft plastic that feels very pleasant in the hand. The buttons have been tested and respond excellently without sticking even after prolonged use. Recessed buttons help prevent accidental activation in your pocket. Significantly better workmanship compared to the similar WHY EVO remote control.  

Price for 1 General GATE remote control - please write your desired color in the comments during the ordering process (red, green, blue, yellow, white, silver).

The General GATE RF remote control fully replaces any original remote control with a frequency of 280 MHz to 870 MHz, with both fixed and rolling codes.

• It can combine up to 4 different brands/manufacturers and models with different frequencies into one remote control.
• It supports not only fixed but also ROLLING codes.
• Multi-frequency auto-scan remote control 280-868 MHz (yes, including the Hormann brand :-))
• Copying/cloning the transmission code/protocol from the original remote control.
• Supplied including a Panasonic CR2032 battery.
• Dimensions: 69 x 34 x 10 mm

Procedure for copying the code from the original remote control:

1. While holding button 1, press button 2 on the General GATE remote control 4 times.
2. Release both buttons. The LED is now flashing briefly at 2-second intervals.
3. Place the original remote control in front of the General GATE at a distance of approximately 2 to 3 cm.
4. Press and hold the button on the original remote control that you want to copy until the LED starts flashing rapidly, confirming that the code has been copied successfully.
5. While the LED is flashing rapidly, press the button on the General GATE remote control where you want to save the code; the LED will light up and then go out after a moment.
6. 6a. (Fixed code) The remote control copy is complete and ready for use.
   6b. (Rolling code) The copy has been created successfully; the new General GATE remote control must now be registered with the receiving unit. The procedure is described in the instructions for the receiving unit. If you are unsure, we will not leave you in the lurch - contact our technician by email or phone. 

One RF GATE remote control for everything: You can program the other 3 buttons in a similar way to control garage doors, blinds, remotely controlled sockets, and practically anything else in your home that uses RF remote control. The receivers can be from different (any) brands and manufacturers, with either fixed or rolling codes. General GATE is in fact the ONLY RF remote control on the market that is truly universal, allowing you to program codes from different manufacturers of garage doors and gates, blinds, and roller shutters into one remote control.

General GATE can replace all of the remote controls shown in the image below (the remote controls shown in the images have been verified. If you do not see your remote control in the image below, this does not mean that General GATE is not compatible with your gate or garage door control brand. Only the most common types are shown - you can try it and verify it yourself; if it does not work, we will refund your money including postage. Only very exceptionally are General GATE units returned; it covers 99% of all radio remote controls available on the European market.