SOMMER APERTO RUBY replacement remote control General GATE

SOMMER APERTO RUBY replacement remote control General GATE SOMMER APERTO RUBY replacement remote control General GATE SOMMER APERTO RUBY replacement remote control General GATE
(VAT 21%)
17.9 EUR
Part number:SOMMER-RUBY-generalGATE
Availability:> 10 pieces in stock
Warranty terms: Brand new, 2 years guarantee,
accepting returns within 30 days
Manufactured by: SOMMER

Delivery to EU: 2 to 7 days, non-EU: 2-20 days



Replacement the original remote control SOMMER APERTO RUBY, 40035V000. Functionality of the remote control is the same as the original. The remote control supplied is already pre-programmed on buttons 1 and 2. You only need to register the remote control to your original receiving unit memory.

For models: RUBY, 40035V000, 40035V002, BASELINE 4025, TX02-868-2, TRIDO, Aperto Sommer RUBY 4035, SOMMER Base Ruby, MARATHON SL, SOMMER APERTO TORANTRIEBE TX02-868-2

The replacement remote control General GATE shown on the left side!

  • The RF remote control General GATE fully replaces the original remote control.
  • Only one single remote control could be used up for 4 different brands or models of different frequencies.
  • Remote control works with both fixed and rolling codes.
  • Multifrequency auto-scan remote control.
  • Copying/cloning of the code/protocol from the original remote control.
  • Battery Panasonic CR2032 included.
  • Dimensions 69 x 39 x 10 mm
  • If any specific colour required, state this information to the customers’ note during placing an order.
  • The price is for 1 piece of the replacement remote control General GATE.

RF remote control General GATE.

How to copy the code from the original remote control:

  1. While holding button no. 1 pushed, press four times button no. 4 on the remote control General GATE.
  2. Release both buttons. LED diode flashes shortly approx. every 2 sec.
  3. Put the original remote control (2-3 centimetres) in the front of General GATE.
  4. Push and hold button you would like to copy on the original remote control. LED diode will flash quickly as a confirmation of successful copying of the code.
  5. While LED diode flashes quickly, push required button on General GATE. LED diode will light up and then it will switch off.
  6. Copy was successfully made. Now you can use the remote control.

How to REGISTER the new remote control into the original receiving unit:

  1. Remove the translucent cover from the control unit.
  2. Press the button labeled CODE, the LED indicator will light up and indicate learning mode start.
  3. By repeatedly pressing the CODE button, you can switch between channels (can be 1-4) to which remote control you want to register.
  4. Within 10 seconds, press and hold the selected button on the remote control to write to the controller.
  5. The LED will start flashing to indicate that the transmit code has been memorized and will turn off. Writing the remote control to the memory of the control unit is complete, you can test the remote control.

One single RF General GATE remote control for all: gate, garage door, venetian blind and indoor lightning. Other 3 buttons of the remote control could be programmed for other devices which require RF remote control. This remote control could be used and programmed for any brand (with both fixed and rolling code). General GATE is THE ONLY RF remote control which is suitable for more RF devices.

This product was added to our catalog on Thursday 04 July, 2019.



Copyright © 2020 REMOTE CONTROL WORLD.