9163

POLARGOS RTS replacement remote control General GATE

POLARGOS RTS replacement remote control General GATE POLARGOS RTS replacement remote control General GATE
Price BRUTTO:
(VAT 21%)
17.8 EUR
Part number:POLARGOS-RTS-generalGATE
Availability:> 10 pieces in stock
Warranty terms: Brand new, 2 years guarantee,
accepting returns within 30 days
Manufactured by: POLARGOS
 
Pcs

Delivery to EU: 2 to 7 days, non-EU: 2-20 days

SHIPPING COST WORLDWIDE IS 6.6 EUR

Battery






Replacement the original remote control POLARGOS RTS. Functionality of the remote control is the same as the original.

For models: EASY WAY 201, EASY-WAY-201

The replacement remote control General GATE shown on the left side!.

  • The RF remote control General GATE fully replaces the original remote control.
  • Only one single remote control could be used up for 4 different brands or models of different frequencies.
  • Remote control works with both fixed and rolling codes.
  • Multifrequency auto-scan remote control.
  • Copying/cloning of the code/protocol from the original remote control.
  • Battery Panasonic CR2032 included.
  • Dimensions 69 x 39 x 10 mm
  • If any specific colour required, state this information to the customers’ note during placing an order.
  • The price is for 1 piece of the replacement remote control General GATE.

RF remote control General GATE.

How to copy the code from the original remote control:

  1. While holding button no. 1 pushed, press four times button no. 4 on the remote control General GATE.
  2. Release both buttons. LED diode flashes shortly approx. every 2 sec.
  3. Put the original remote control (2-3 centimetres) in the front of General GATE.
  4. Push and hold button you would like to copy on the original remote control. LED diode will flash quickly as a confirmation of successful copying of the code.
  5. While LED diode flashes quickly, push required button on General GATE. LED diode will light up and then it will switch off.
  6. Copy was successfully made. Now you can use the remote control.

How to REGISTER the new remote control into the original receiving unit:

  1. Place the controller in the location indicated on the cover.
  2. Select the controller button to control the gateway.
  3. Hold down the programming button until the PROG indicator flashes slowly. The DANGER indicator will light when the button is pressed.
  4. Release the saved button.

One single RF General GATE remote control for all: gate, garage door, venetian blind and indoor lightning. Other 3 buttons of the remote control could be programmed for other devices which require RF remote control. This remote control could be used and programmed for any brand (with both fixed and rolling code). General GATE is THE ONLY RF remote control which is suitable for more RF devices.



This product was added to our catalog on Thursday 15 August, 2019.

For POLARGOS


 

.
Copyright © 2020 REMOTE CONTROL WORLD.