8219

MOOVO MT4G - replacement remote control General GATE

MOOVO MT4G - replacement remote control General GATE MOOVO MT4G - replacement remote control General GATE
Price BRUTTO:
(VAT 21%)
17.9 EUR
Part number:MOOVO-MT4G-generalGATE
Availability:> 10 pieces in stock
Warranty terms: Brand new, 2 years guarantee,
accepting returns within 30 days
Manufactured by: for MOOVO
 
Pcs

Delivery to EU: 2 to 7 days, non-EU: 2-20 days

SHIPPING COST WORLDWIDE IS 6.6 EUR

Battery






Replacement remote control compatible with remote control  MOOVO MT4G. Functionality of the remote control is the same as the original. The remote control supplied is already pre-programmed on buttons 1 and 2. You only need to register the remote control to your original receiving unit memory.

For models: MT4G, MT4V, MT4, XW532E, XW432E

The replacement remote control General GATE shown on the left side!

  • The RF remote control General GATE fully replaces the original remote control.
  • Only one single remote control could be used up for 4 different brands or models of different frequencies.
  • Remote control works with both fixed and rolling codes.
  • Multifrequency auto-scan remote control.
  • Copying/cloning of the code/protocol from the original remote control.
  • Battery Panasonic CR2032 included.
  • Dimensions 69 x 39 x 10 mm
  • If any specific colour required, state this information to the customers’ note during placing an order.
  • The price is for 1 piece of the replacement remote control General GATE.

RF remote control General GATE.

How to copy the code from the original remote control:

  1. While holding button no. 1 pushed, press four times button no. 2 on the remote control General GATE.
  2. Release both buttons. LED diode flashes shortly approx. every 2 sec.
  3. Put the original remote control (2-3 centimetres) in the front of General GATE.
  4. Push and hold button you would like to copy on the original remote control. LED diode will flash quickly as a confirmation of successful copying of the code.
  5. While LED diode flashes quickly, push required button on General GATE. LED diode will light up and then it will switch off.
  6. Copy was successfully made. Now you can use the remote control.

How to REGISTER the new remote control into the original receiving unit:

  1. Press the "P1" button to check that the green indicator flashes.
  2. (within 10 seconds) Press and hold the button on the transmitter you want to store for at least 2 seconds.
  3. If the save procedure is successful, the green indicator flashes 3 times.

One single RF General GATE remote control for all: gate, garage door, venetian blind and indoor lightning. Other 3 buttons of the remote control could be programmed for other devices which require RF remote control. This remote control could be used and programmed for any brand (with both fixed and rolling code). General GATE is THE ONLY RF remote control which is suitable for more RF devices.



This product was added to our catalog on Thursday 20 December, 2018.

For for MOOVO


 

.
Copyright © 2020 REMOTE CONTROL WORLD.