11467

General GATE radio remote control ROLLING and FIXed codes 27-40 MHz

13415.jpg
Price BRUTTO:
(VAT 21%)
19.0 EUR
Part number:GENERAL-gate-low-frequency
Availability:> 10 pieces in stock
Warranty terms: Brand new, 2 years guarantee,
accepting returns within 30 days
 
Pcs

Delivery to EU: 2 to 7 days, non-EU: 2-20 days

SHIPPING COST WORLDWIDE IS 7 EUR

The remote control GENERAL GATE is a replacement univesal radio remote control which you could use for up to 4 gate, garage door, venetian blind or indoor lightning. The remote control is made of special soft plastic of nice hand feel. The remote control General GATE was tested, we can confirm that all buttons work properly and are easy to push even after a long use. Embedded buttons restrict unwanted switching in your pocket.

Price for 1 pc of General GATE.

General GATE RF remote fully replaces any original original remote control with a frequency of 27 MHz to 40 MHz with both fixed and rolling codes.

  • Only one single remote control could be used up for 4 different brands or models of different frequencies.
  • Remote control works with both fixed and rolling codes.
  • Multifrequency auto-scan remote control 27 - 40 MHz (even Hormann brand :-) ).
  • Copying/cloning of the code/protocol from the original remote control.
  • Battery Panasonic CR2032 included.
  • Dimensions 62 x 37 x 15 mm

How to copy the code from the original remote control:

  1. While holding button no. 1 pushed, press four times button no. 2 on the remote control General GATE.
  2. Release both buttons. LED diode flashes shortly approx. every 2 sec.
  3. Put the original remote control (2-3 centimetres) in the front of General GATE.
  4. Push and hold button you would like to copy on the original remote control. LED diode will flash quickly as a confirmation of successful copying of the code.
  5. While LED diode flashes quickly, push required button on General GATE. LED diode will light up and then it will switch off.
  6. 6a (Rolling code) Copy was successfully made. Now it is important to log the new remote control into the original receiving unit.
    6b (Fixed code) Copy was successfully made and it is ready to be used.

One single RF General GATE remote control for all: gate, garage door, venetian blind and indoor lightning. Other 3 buttons of the remote control could be programmed for other devices which require RF remote control. This remote control could be used and programmed for any brand (with both fixed and rolling code). General GATE is the ONLY RF remote in the market that is truly universal, so you can program the codes of different gate manufacturers, blinds and shutters into one remote.



For GENERAL


 

.
Copyright © 2021 REMOTE CONTROL WORLD.