8081

Avidsen TOV4, XA-4H replacement remote control General GATE

Avidsen TOV4, XA-4H replacement remote control General GATE Avidsen TOV4, XA-4H replacement remote control General GATE
Price BRUTTO:
(VAT 21%)
18.0 EUR
Part number:Avidsen-TOV4-generalGATE
Availability:> 10 pieces in stock
Warranty terms: Brand new, 2 years guarantee,
accepting returns within 30 days
Manufactured by: AVIDSEN
 
Pcs

Delivery to EU: 2 to 7 days, non-EU: 2-20 days

SHIPPING COST WORLDWIDE IS 6.7 EUR

Battery






Replacement the original remote control ADVISEN 104700 TOV4, XA-4H. Functionality of the remote control is the same as the original. The remote control supplied is already pre-programmed on buttons 1 and 2. You only need to register the remote control to your original receiving unit memory.

For models: Avidsen 104700 TOV4, Avidsen 60 (Astrell 50, Open Box), Avidsen 150 (Astrell 85, Ever 85), Avidsen 350 (Astrell 300, Ever 212), Tec 400, Tec 500, Slide 200, Slide 400, Slide 800, ASTRELL 85 (de plus de 4 ans), ASTRELL 120, ASTRELL 200, ASTRELL 400, ASTRELL 614700, AVIDSEN AXE 4230, AVIDSEN EVER212, AVIDSEN EVER300, AVIDSEN ROD120, AVIDSEN SLIDE200, AVIDSEN SLIDE400, AVIDSEN TEC400, AVIDSEN TEC500, AVIDSEN XC420, AVIDSEN XP300+,  XA-4H, EVER CLASSIC, ANTHEA, KHEA, ORANE, 

The replacement remote control General GATE shown on the left side!

  • The RF remote control General GATE fully replaces the original remote control.
  • Only one single remote control could be used up for 4 different brands or models of different frequencies.
  • Remote control works with both fixed and rolling codes.
  • Multifrequency auto-scan remote control.
  • Copying/cloning of the code/protocol from the original remote control.
  • Battery Panasonic CR2032 included.
  • Dimensions 69 x 39 x 10 mm
  • If any specific colour required, state this information to the customers’ note during placing an order.
  • The price is for 1 piece of the replacement remote control General GATE.

RF remote control General GATE.

How to copy the code from the original remote control:

  1. While holding button no. 1 pushed, press four times button no. 4 on the remote control General GATE.
  2. Release both buttons. LED diode flashes shortly approx. every 2 sec.
  3. Put the original remote control (2-3 centimetres) in the front of General GATE.
  4. Push and hold button you would like to copy on the original remote control. LED diode will flash quickly as a confirmation of successful copying of the code.
  5. While LED diode flashes quickly, push required button on General GATE. LED diode will light up and then it will switch off.
  6. Copy was successfully made. Now you can use the remote control.

How to REGISTER the new remote control into the original receiving unit:

  1. Open the RF Receiver cover.
  2. Press the RX button on the control unit, the LED1 lights up. After 5 seconds the LED1 goes out.
  3. Press the button on the remote control you wish to register, the LED2 lights up.
  4. Now the remote control is registered into the memory of the control unit. Try functionality.

One single RF General GATE remote control for all: gate, garage door, venetian blind and indoor lightning. Other 3 buttons of the remote control could be programmed for other devices which require RF remote control. This remote control could be used and programmed for any brand (with both fixed and rolling code). General GATE is THE ONLY RF remote control which is suitable for more RF devices.



This product was added to our catalog on Tuesday 20 November, 2018.

For AVIDSEN


 

.
Copyright © 2020 REMOTE CONTROL WORLD.