Original turntable stylus AUDIO-TECHNICA AT-VMN95C with a conical stylus
Complete original higher-class Audio-Technica stylus supplied with a conical stylus. It uses a standard 1/2" (12.7 mm) screw-mount fitting, making it compatible with most commonly used MM cartridges. It is suitable for home Hi-Fi listening with an emphasis on high-quality sound reproduction, especially when playing older vinyl records. Its construction corresponds to the AT-VM95 series (formerly AT95).
Technical parameters:
- frequency range: 20 Hz – 20 kHz
- recommended tracking force: 1.8 – 2.2 g (optimal 2.0 g)
- stylus weight: 6.1 g
- output voltage: 4.0 mV / 1 kHz
- channel balance: 2.5 dB
- channel separation: 18 dB
- impedance: 47 kOhm
- stylus type: conical 0.6 mil (Bonded round shank)
The AT-VM95C stylus can be used as a replacement for most moving-magnet MM cartridges with a standard 1/2" mount.
Additional information:
- coil impedance: 3.3 kOhm (1 kHz)
- DC resistance: 485 Ohm
- recommended capacitive load: 100 – 200 pF
- coil inductance: 550 mH (1 kHz)
- vertical tracking angle: 23°
- dimensions: 17.2 × 18.9 × 28.3 mm
For models: AUDIO-TECHNICA AT-LPW30, AUDIO-TECHNICA ATLP3XBT, AUDIO-TECHNICA ATLP70XBT, AUDIO-TECHNICA ATLPW30BK, SANSUI SR4040, SANSUI SR4050, TECHNICS SL100C
Original turntable stylus AUDIO-TECHNICA AT-VMN95C with a conical stylus
Complete original higher-class Audio-Technica stylus supplied with a conical stylus. It uses a standard 1/2" (12.7 mm) screw-mount fitting, making it compatible with most commonly used MM cartridges. It is suitable for home Hi-Fi listening with an emphasis on high-quality sound reproduction, especially when playing older vinyl records. Its construction corresponds to the AT-VM95 series (formerly AT95).
Technical parameters:
- frequency range: 20 Hz – 20 kHz
- recommended tracking force: 1.8 – 2.2 g (optimal 2.0 g)
- stylus weight: 6.1 g
- output voltage: 4.0 mV / 1 kHz
- channel balance: 2.5 dB
- channel separation: 18 dB
- impedance: 47 kOhm
- stylus type: conical 0.6 mil (Bonded round shank)
The AT-VM95C stylus can be used as a replacement for most moving-magnet MM cartridges with a standard 1/2" mount.
Additional information:
- coil impedance: 3.3 kOhm (1 kHz)
- DC resistance: 485 Ohm
- recommended capacitive load: 100 – 200 pF
- coil inductance: 550 mH (1 kHz)
- vertical tracking angle: 23°
- dimensions: 17.2 × 18.9 × 28.3 mm
For models: AUDIO-TECHNICA AT-LPW30, AUDIO-TECHNICA ATLP3XBT, AUDIO-TECHNICA ATLP70XBT, AUDIO-TECHNICA ATLPW30BK, SANSUI SR4040, SANSUI SR4050, TECHNICS SL100C
Featured Products
General BAR silver - simple remote control
General ZOOMY Remote control with big buttons for seniors, kids
Share your device's brand and model, and we'll handle the rest. Our experts will handle the request and your tailored recommendations will be on their way via email.








