Replacement radio (RF) remote control fully compatible with type FAAC XT4 433 RC, 787452.

A perfect 1:1 copy designed and manufactured by our company – has all functions of the original remote for these FAAC models: D1000, D600, D700HS, E024S, E045, E1000, E124, E145, E600, E700HS, E721, RP1 433 RC, RP433SLH, XF 433MHZ, XR433C, XT2 433MHZ RC, XT4 433 MHZ RC (There may not be listed all compatible models. If you are not sure, just tell us your device model (by online chat, email), we will promptly check, verify if compatible with your device. The verified compatibility is guaranteed by us.)

This remote control is available on branded remote control General VATRONIC (shown on the left). We guarantee that the remote control will perform all the functions of the original RC.

• The RF remote control General VATRONIC fully replaces the original remote control.
• Only one single remote control could be used up for 4 different brands or models of different Frequencies (270-870 MHz).
• Remote control works with both fixed and rolling codes.
• Multi-frequency auto-scan remote control.
• Copying/cloning transmitting code/protocol from the original remote.
• Includes a 3V CR2032 battery and a metal keychain carabiner.
• Dimensions: 73 x 31 x 11 mm
• If any specific colour required, state this information to the customers note when placing an order.

The remote control supplied is already pre-programmed on buttons 1 and 2. You only need to register the remote control to your original receiving unit memory.

Procedure for copying the code from the original remote control:

method of pairing/coding on request

How to REGISTER the new remote control into the original main unit:

1. Ensure you have the previously learned controller.
2. Press and hold down the P1 and P2 buttons simultaneously until both LEDs start flashing for 5 seconds.
3. Both LEDs will flash slowly for 5 seconds.
4. Within 5 seconds, press the corresponding button on the remote control that has already been learned to enable the learning of the selected channel.
5. The LED on the control unit board corresponding to the learned channel will flash for 5 seconds, during which another code must be transmitted.
6. The corresponding LED will light up for 2 seconds and continue to flash for the next 5 seconds, during which another controller can be added.
7. After 5 seconds, the LED will turn off, and the procedure is complete.

One RF General VATRONIC remote for everything: You can clone controls for another gate/garage door, blinds, remotely controlled sockets, and anything else you have at home with RF (radio) remote control on the other 3 buttons in a similar way. Thus, it can control up to 4 different devices/receivers. Receivers can be of different (any) brands and frequencies with both fixed and floating codes. General VATRONIC and General GATE are indeed the ONLY RF remote controls on the market that are truly so universal that you can program codes from various gate and door manufacturers into one remote. Supported frequency 280-870 MHz.