Replacement remote control EMOVE HANDSET EM203, EM303 - 100% replacement 1:1 of the original remote control.
This remote control is available on branded remote control CARAVAN MOVER (shown on the left). We guarantee that the remote control will perform all the functions of the original RC.
It is not an universal remote, it only works as a replacement for the remote EMOVE HANDSET EM203, EM303. shown on the right It does not require any programming, codes, etc. you just insert the batteries and pair it with the control unit in the same way as the original remote. Pairing instructions and battery 9V are included.________________________________________________________________________________________________________________________________________________
INSTRUCTIONS for synchronizing EMOVE HANDSET EM203, EM303 with the control box:
- If you do not have the control unit turned on, turn it on
- Turn on the new remote control
- Press and hold the RESET button on the control unit for a short time. There are 3 diodes on the control unit - 2 diodes on the left will flash green, 1 on the far right will flash red
- Simultaneously press and hold the UP and DOWN buttons on the remote control until the 2 diodes on the left are permanently lit green (the red diode on the right will stop lighting)










Replacement remote control EMOVE HANDSET EM203, EM303 - 100% replacement 1:1 of the original remote control.
This remote control is available on branded remote control CARAVAN MOVER (shown on the left). We guarantee that the remote control will perform all the functions of the original RC.
It is not an universal remote, it only works as a replacement for the remote EMOVE HANDSET EM203, EM303. shown on the right It does not require any programming, codes, etc. you just insert the batteries and pair it with the control unit in the same way as the original remote. Pairing instructions and battery 9V are included.________________________________________________________________________________________________________________________________________________
INSTRUCTIONS for synchronizing EMOVE HANDSET EM203, EM303 with the control box:
- If you do not have the control unit turned on, turn it on
- Turn on the new remote control
- Press and hold the RESET button on the control unit for a short time. There are 3 diodes on the control unit - 2 diodes on the left will flash green, 1 on the far right will flash red
- Simultaneously press and hold the UP and DOWN buttons on the remote control until the 2 diodes on the left are permanently lit green (the red diode on the right will stop lighting)





Featured Products
General BAR silver - simple remote control
General ZOOMY Remote control with big buttons for seniors, kids
Share your device's brand and model, and we'll handle the rest. Our experts will handle the request and your tailored recommendations will be on their way via email.